X Series E83 X3 2.0d (M47T2) OFFRD
Remove inner and outer cavity acoustic baffles (3).
Installation information:
-
Apply window glass adhesive to cavity acoustic baffles in area (3).
Weld in reinforcement plate at severance cut.
Open weld joints in areas (1).
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 210 mm from roof frame
Measurement b = approx. 160 mm from M8 threaded hole
Measurement c = approx. 330 mm
Open weld joints in areas (1).
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
04.02.2013 19:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
