X Series E83 X3 2.0d (M47T2) OFFRD
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer plate only for following severance cuts.
Measurement a = approx. 150 mm from roof edge.
Measurement b = approx. 80 mm below severance cut a.
Measurement c = approx. 560 mm before hole dia. 20 mm.
Measurement d = approx. 80 mm before severance cut c.
Open weld joints in areas (1).
Installation:
Metal sections (2) are needed again to seal cowl.
Important!
For following severance cut, do not damage sunroof water
drain hose.
Mark severance cut (1) in accordance with measurement and cut.
Measurement a = approx. 190 mm from roof edge.
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
04.02.2013 19:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
