X Series E83 X3 2.0d (M47T2) OFFRD
41 14 511
Replacing complete rear left wheel arch (rear
left side panel removed)
Read contents of Body, General.
Refer to texts on KSD CD (flat rate number 41 14 511)
for details of stripping and rigging tasks.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) C-pillar reinforcement
-
(2) Inner side frame
-
(3) Rear wheel arch
-
(4) Rear outer entrance shaped part (not shown)
-
(5) Rear entrance shaped part (not shown)
-
(6) D-pillar shaped part (not shown)
Mark severance cut (1) in accordance with measurement and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 160 mm from M8 threaded hole
Open weld joints in area (2).
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
04.02.2013 19:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
