X Series E83 X3 2.0d (M47T2) OFFRD
51 11 156
Removing and installing/replacing front
bumper trim (M Technic aerodynamic kit)
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove both fog light trims
Version with headlight washer system:
•
Remove both covers for headlight washer system
Release screws (1).
Remove air duct (2).
Installation:
Make sure air duct (2) is in correct position.
Release screws (1) on bumper trim (2).
Installation:
For adjustment, refer to Body gap dimensions.
RA Removing and installing/replacing front bumper trim (M Technic aerodynamic kit)
BMW AG - TIS
04.02.2013 20:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
