X Series E83 X3 2.0d (M47T2) OFFRD
61 61 041
Replacing both windscreen wiper blades
Move wipers into fold-back position:
-
Switch on terminal "R".
-
Actuate wiper control lever and bring wiper arms to a stop in
vertical position (fold-back position) by switching off terminal
"R".
-
Remove ignition key from ignition switch.
Fold back wiper arm (3).
Press locking spring (1) in direction of arrow. Pull wiper
blade (2) to wiper arm (3) and feed out.
Installation:
Install new wiper blade and snap into place.
Fold wiper arms to windscreen.
Important!
Before switching on terminal "R" or the ignition or starting the
engine, you must fold the wiper arms onto the windscreen
otherwise damage will be caused.
Switch on terminal "R".
Set wiper system to rest position by flick-wiping.
RA Replacing both windscreen wiper blades
BMW AG - TIS
05.02.2013 01:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -