X Series E83 X3 2.0d (N47) OFFRD
00 00 ...
Tyres: checking inflation pressure, correcting if necessary (incl. spare wheel), checking external
condition, tread depth, pattern. In event of nonuniform wear, carry out measurement and
correction of wheel alignment
-
Checking tyre inflation pressure:
•
Check tyre inflation pressure in accordance with information plate on B-pillar
•
The inflation pressure in the spare wheel must be 0.5 bar higher than the maximum specified value on the
information plate
•
If necessary, initialize Run Flat Indicator
-
Checking tyre condition:
•
Check tread depth of all tyres with tyre tread gauge
•
Check tyre tread surfaces and side walls for incisions and foreign particles such as nails or screws
•
Check tyre tread pattern for localized flattening and wear on one side; if necessary, carry out wheel/chassis
alignment after consulting with customer and issue a separate invoice for this work
Note:
•
For details of approved wheel-tyre combinations, refer to KSD CD
•
For reasons of driving safety, only use tyres of the same type and tread pattern on a single vehicle
•
Inform customer of any incorrect or worn tyres
RA Tyres: checking inflation pressure, correcting if necessary (incl. spare wheel),
BMW AG - TIS
05.02.2013 20:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -