X Series E83 X3 2.0d (N47) OFFRD
Make sure roller cam followers (1) are in correct installation
position.
Important!
The camshaft sprockets (A and E) must be adjusted to the
marking before the camshaft carrier is mounted on the
cylinder head. Risk of damage! to engine valves.
Place camshaft carrier on cylinder head.
Tighten bolts in sequence (1 to 14).
Install chain sprocket with timing chain.
Fit camshaft bolts (1).
Tighten camshaft bolts (1) to 10 Nm.
Release camshaft bolts (1) by 90
°
.
RA Removing and cylinder head (N47, N47S)
BMW AG - TIS
05.02.2013 21:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
