X Series E83 X3 2.0d (N47) OFFRD
11 31 090
Installing and removing/replacing chain
tensioner piston (N47, N47S)
Release chain tensioner (1).
Tightening torque:11 12 2AZ
.
Important!
Have a cleaning cloth ready. A small quantity of engine oil will
emerge after the screw connection has been released.
Make sure no oil runs into the clutch housing.
Installation:
Replace sealing ring.
If the chain tensioner is reused, its oil chamber must be drained.
Place chain tensioner on a level working surface and slowly
compress.
Repeat procedure twice.
Assemble engine.
RA Installing and removing/replacing chain tensioner piston (N47, N47S)
BMW AG - TIS
05.02.2013 21:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -