X Series E83 X3 2.0d (N47) OFFRD
13 62 535
Replacing fuel metering unit on high-pressure
pump (N47)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Switch off ignition
•
Remove acoustic cover at front
Note:
Installation location: under intake air manifold.
Unlock and disconnect plug.
Release screws (1).
Remove metering unit.
Tightening torque 13 51 1AZ.
Clean sealing faces of metering unit.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing fuel metering unit on high-pressure pump (N47)
BMW AG - TIS
05.02.2013 22:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -