X Series E83 X3 2.0d (N47) OFFRD
16 11 030
Removing and installing/replacing fuel tank
Special tools required:
•
13 5 281
•
13 5 282
Recycling
Fuel escapes when fuel lines are detached. Have a suitable
collecting container ready.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Important!
Ensure adequate ventilation in the place of work!
Avoid skin contact (wear gloves)!
After installation of fuel tank/prior to first engine start-up:
•
Fill fuel tank with at least 5 litres of fuel.
•
Check ground connection at fuel filler neck to body for
continuity. If necessary, clean contact surface between
body and fuel filler pipe screw connection.
•
Check transfer function of suction jet pump.
Necessary preliminary tasks:
•
Draw off fuel from fuel tank
•
Remove rear seat bench
•
Remove underbody panelling
•
Remove handbrake Bowden cables
•
Remove complete propeller shaft
RA Removing and installing/replacing fuel tank
BMW AG - TIS
05.02.2013 22:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
