bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Steering Spindle Lower Section (N47)|Page 1013 > < 2 RA Removing And Installing _ Replacing Lower Section Of Steering Column Trim
Page 1
background image

32 31 070

Removing and installing/replacing steering
spindle lower section (N47)

Warning!

Danger of explosion!

To ensure sufficient space for removal of steering spindle
lower section, remove both electrical leads from auxiliary
heater (danger of short-circuiting).

Important!

If the lower section of the steering spindle is separated from
the double joint/steering column, the steering column switch
cluster may be damaged when the steering wheel is turned.

Necessary preliminary tasks:

Disconnect battery negative lead

Important!

Pay attention to coolant hoses.

 

Disconnect plug connection (1).

Release screws (2).

Lay coolant expansion tank (3) to one side.

RA  Removing and installing/replacing steering spindle lower section (N47)

BMW AG - TIS

06.02.2013  00:56

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Steering Spindle Lower Section (N47)|Page 1013 > < 2 RA Removing And Installing _ Replacing Lower Section Of Steering Column Trim