X Series E83 X3 2.0d (N47) OFFRD
Important!
Pay attention to hydraulic lines.
Release screws (1).
Slacken nut (2).
Lay bracket (3) with oil reservoir to one side.
Installation:
Replace self-locking nut.
Tightening torque 32 41 13AZ
.
Disconnect plug connection (1).
Unlock locking clamp (2) and detach pressure pipe (3) from
manifold.
Disconnect plug connection (1).
Open cover (2) and remove.
Release nut and remove positive lead (3).
Release nut and remove negative lead (4).
Installation:
Replace self-locking nuts.
Important!
Pay attention to coolant hoses.
Disconnect plug connection (1).
Slacken nut (2).
Lay holder (3) with water valve and auxiliary heater to one side.
Installation:
Replace self-locking nut.
RA Removing and installing/replacing steering spindle lower section (N47)
BMW AG - TIS
06.02.2013 00:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -