X Series E83 X3 2.0d (N47) OFFRD
41 12 535
Replacing complete rear luggage
compartment floor (tail panel removed)
Read contents of Body, General.
Refer to the description texts of the KSD CD (FRU
41 12 535) for details of stripping-down and rigging work.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Luggage compartment floor
-
(2) Luggage compartment floor, right
-
(3) Rear axle carrier, upper section, right
-
(4) Rear axle carrier, lower section, right
-
(5) Cross-member, rear axle take-up, rear
-
(6) Rear axle carrier, upper section, left
-
(7) Rear axle carrier, lower section, left
-
(8) Luggage compartment floor, left
Open weld joints in areas (1).
Installation:
Adjust new component (2) to fit to body in accordance with paint
impressions.
Open weld joints in area (1).
Installation:
Weld in area (2) additionally.
RA Replacing complete rear luggage compartment floor (tail panel removed)
BMW AG - TIS
06.02.2013 03:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -