X Series E83 X3 2.0d (N47) OFFRD
Open weld joints in area (1).
Mark severance cut (1) in accordance with measurements a and
b and cut bulkhead support carrier.
Measurement a=95 mm
Measurement a=120 mm
Open weld joints in area (2).
Installation:
Weld in reinforcing panel at severance cut (1).
Note:
Right side only:
Open weld joints in areas (1) and (2).
Note:
Right side only:
Open weld joints in area (1).
RA Replacing engine carrier with wheel arch, left
BMW AG - TIS
06.02.2013 03:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
