X Series E83 X3 2.0d (N47) OFFRD
51 16 360
Removing and installing right glovebox
Note:
Open glovebox.
Unclip pin (1) from retaining strap (2).
Unclip pin (1) from shock absorber (2).
Note:
Close glovebox (3) and secure against falling out.
Release screws (1) and remove counter-support (2).
Open glovebox (3) and remove.
Installation:
Make sure counter-support (1) is correctly seated on chamfered
faces of shaft (2).
If necessary, turn shaft (2) accordingly.
RA Removing and installing right glovebox
BMW AG - TIS
06.02.2013 04:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -