X Series E83 X3 2.0d (N47) OFFRD
Open cover for passenger airbag (2).
Note:
The mounting plate may fall into the passenger footwell when
screws (1) are released.
Release screws (1), tightening torque 72 12 10AZ
.
Remove complete passenger airbag cover (2) with associated
mounting plate.
Installation:
Make sure mounting plate (1) is correctly seated in retaining
strap (2) of passenger airbag cover.
Release mucket (1) in area of instrument panel trim (5).
Release screws (2).
Unscrew nuts (3).
Disconnect plug connection for solar sensor (6).
RA Removing and installing instrument panel trim
BMW AG - TIS
06.02.2013 05:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -