X Series E83 X3 2.0d (N47) OFFRD
Lever out spring retainer (3) with screwdriver.
Installation:
Replace faulty spring retainer.
Continue sliding rear connecting link (2) with drive cable plate (1) towards rear out of guide channel and remove in
succession.
Installation:
Slide drive cable plate (1) up against drive cable.
Install locking lever (2) and lock retaining bracket.
RA Removing and installing mechanism for rear glass lid
BMW AG - TIS
06.02.2013 06:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -