bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Replacing Fluid Reservoir For Windshield Washer System|Page 2345 > < 3 RA Removing And Installing_replacing A Jet Nozzle In Windshield Washer System
Page 1
background image

61 71 061

Replacing fluid reservoir for windshield
washer system

Note:

Drain fluid tank for windshield washer system.

Necessary preliminary tasks:

Pull out windshield washer pump (unlock and disconnect plug

connection).

Pull out window washer pump for rear window cleaning

system (unlock and disconnect plug connection). 

If necessary, pull out washer pump of headlight cleaning

system (unlock and disconnect plug connection).

Unscrew bolt (1).

Unlock and disconnect level switch plug connection on windshield
washer system (2).

If necessary, unclip hose (3).

Remove fluid reservoir for windshield washer system (4) in
direction of arrow.

Installation:

Feed guide (1) of fluid reservoir for windshield washer
system (2) in direction of arrow into mountings (3).

RA  Replacing fluid reservoir for windshield washer system

BMW AG - TIS

06.02.2013  09:30

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Replacing Fluid Reservoir For Windshield Washer System|Page 2345 > < 3 RA Removing And Installing_replacing A Jet Nozzle In Windshield Washer System