X Series E83 X3 2.0d (N47) OFFRD
63 21 180
Removing and installing/replacing left or right
rear light (on side panel) (from 09/2006)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove flap in luggage compartment panel
Fold back side trim panel (1) in direction of arrow.
Disconnect plug connection (2).
Release nuts (3,5,6), gripping the threaded pin (4) with a
suitable tool in so doing. Tightening torque 63 21 1AZ
.
Remove rear light in outwards direction from side panel.
Remove socket housing.
Installation:
•
Observe tightening sequence:
1.
Tighten nut (3)
2.
Tighten nut (5)
3.
Tighten nut (6)
•
Make sure sealing washers are fitted on threaded pins
(4) between rear light and side panel
•
Make sure sealing frame for rear light is correctly
positioned on rear light
•
Make sure gap (outer) is uniform all round between rear
light and side panel
RA Removing and installing/replacing left or right rear light (on side panel) (from
BMW AG - TIS
06.02.2013 09:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -