X Series E83 X3 2.0d (N47) OFFRD
Twist valve insert out of filler neck (2) with remover (1).
Installation:
Screw in valve insert hand-tight only.
After installation:
•
Evacuate and fill A/C system
•
Check leak-tightness of valve insert with soapy solution
In event of leakage:
-
Evacuate A/C system
-
Check sealing faces on line and valve insert for damage,
replace line or valve insert if necessary
-
If necessary, carry out leak detection
RA Replacing valve insert for refrigerant line
BMW AG - TIS
06.02.2013 10:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -