X Series E83 X3 2.0d (N47) OFFRD
72 12 045
Removing and installing/replacing left or right
AHPS2 head airbag (version without slide/tilt
sunroof)
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
The AHPS head airbag must be replaced if it is damaged
during removal or installation.
A damaged AHPS head airbag exhibits an impaired protective
function and in extreme cases loses its protective function
altogether.
Necessary preliminary tasks:
•
Remove headliner (version without slide/tilt sunroof)
•
Remove instrument panel trim
Installation:
•
Microencapsulated screws (Loctite) must be replaced and
may not be reused
•
Screw connection must be completed within 20 mins. (start of
curing)
•
Microencapsulated screws must not be retightened
•
Thread of nut must be cleaned beforehand in event of
repeated use
Installation summary, retaining elements, AHPS head airbag:
RA Removing and installing/replacing left or right AHPS2 head airbag (version witho
BMW AG - TIS
06.02.2013 16:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -