X Series E83 X3 2.0i (N46) OFFRD
16 11 071
Replacing rubber sleeve between fuel filler
pipe and fuel tank
Recycling
Fuel escapes when fuel lines are detached. Have a suitable
collecting container ready.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Important!
Ensure adequate ventilation in the place of work!
Avoid skin contact (wear gloves)!
Before starting the engine for the first time:
•
Fill fuel tank with at least 5 litres of fuel.
Necessary preliminary tasks:
•
Draw off fuel from fuel tank
•
Remove right underbody panelling
Loosen hose clamps (1).
Detach rubber sleeve (2) first from fuel filler pipe and then from
fuel tank.
Installation:
Tightening torque 16 12 10AZ
.
RA Replacing rubber sleeve between fuel filler pipe and fuel tank
BMW AG - TIS
08.02.2013 04:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -