X Series E83 X3 2.0i (N46) OFFRD
Installation:
Cable (1) must be laid in a loop around the corrugated tube (2).
Cable must not restrict freedom of movement of lever-type sensor!
Unlock and disconnect plug connection (1) using a
screwdriver (2).
Unpin cables (1) issuing from lever-type sensor on blue plug
using special tool 61 0 307 from special tool kit 61 0 300 .
Important!
Risk of damage:
Carefully feed cable out of cable guides (3 and 4). Do not
kink cable.
Removing fuel level sensor:
•
Disengage cable from guides (3 and 4).
•
Carefully pull tab (1) in direction of arrow; at the same time,
press tab (2) in direction of arrow and press out fuel level
sensor downwards.
RA Removing and installing or replacing fuel gauge sensor (petrol/gasoline, right)
BMW AG - TIS
08.02.2013 04:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
