X Series E83 X3 2.0i (N46) OFFRD
Important!
Make sure that tab (1) of adapter ring lies completely in
recess (2).
Carefully raise service cap (4) on right.
Unlock and detach fuel line (2).
Detach vent line (3).
Disconnect connector (1).
Important!
Carefully release quick-release fasteners and detach.
Make sure quick-release fasteners are correctly engaged.
Test the quick-release fasteners by pulling on them.
Installation:
Cable (1) must be laid in a loop around the corrugated tube (2).
Cable must not restrict freedom of movement of lever-type sensor!
Unlock and disconnect plug housing (1) using a screwdriver (2).
RA Removing and installing or replacing fuel pump (petrol/gasoline)
BMW AG - TIS
08.02.2013 04:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
