X Series E83 X3 2.0i (N46) OFFRD
Release nuts on rubber mount of rear muffler on left and right and
remove rear muffler (1).
Installation:
Fit rubber mount of rear muffler on new rear muffler.
Installation:
Connect new rear muffler and front muffler by means of clamping
sleeves.
Cutting point is in middle of clamping sleeve.
Align exhaust system and clamping sleeves so that there is
sufficient distance to the adjoining components.
Check position of tailpipes (1) to body cutout.
Tighten down screws of clamping sleeves.
Note:
Check exhaust system for leaks.
RA Removing and installing/replacing rear muffler (N46)
BMW AG - TIS
08.02.2013 05:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -