X Series E83 X3 2.0i (N46) OFFRD
Cut exhaust pipes with special tool 00 2 210 at marked points
and deburr.
Release nuts and remove catalytic converter.
Installation:
Connect new catalytic converter and front muffler by means of
clamping sleeves.
Cutting point is in middle of clamping sleeve.
Align exhaust system and clamping sleeves so that there is
sufficient distance to the adjoining components.
Check position of tailpipes (1) to body cutout.
Tighten down screws of clamping sleeves.
Note:
Check exhaust system for leaks.
RA Removing and installing/replacing catalytic exhaust gas converter (N46)
BMW AG - TIS
08.02.2013 05:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
