X Series E83 X3 2.0i (N46) OFFRD
Detach plugs (1) and (2) from servomotor.
Detach plug (1) from reversing light switch.
Release cable from mountings and tie to one side.
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Relieve tension on clutch slave cylinder slowly; otherwise air
will be drawn in through sealing sleeve.
Release nuts and remove clutch slave cylinder.
Tightening torque 21 52 5AZ
.
Unfasten screws.
Tightening torque 23 00 1AZ
.
RA Removing and installing transmission (GS6-37BZ)
BMW AG - TIS
08.02.2013 05:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
