X Series E83 X3 2.0i (N46) OFFRD
27 10 720
Replacing servomotor (ATC 400 X-Drive)
Important!
After replacement, the "Repair" service function must be
carried out with GT1.
Necessary preliminary tasks:
•
Remove complete exhaust system.
•
Remove heat shield.
Release screws and remove transmission cross-member.
Tightening torque 27 00 10AZ
.
Disconnect plugs (1 and 2).
Release screws and remove servomotor from transfer box.
Tightening torque 27 00 13AZ
.
RA Replacing servomotor (ATC 400 X-Drive)
BMW AG - TIS
08.02.2013 05:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
