X Series E83 X3 2.0i (N46) OFFRD
31 11 001
Replacing front axle carrier
Warning!
Danger to life!
Secure engine in installation position to prevent it from falling
down.
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove front wheels
•
Remove both tension struts from front axle carrier
•
Remove both control arms from front axle carrier
•
M47T2, N46: Remove left tie rod end from swivel bearing
•
M47T2, N46: Remove right tie rod from steering gear
•
Disconnect pressure line for power steering from front axle
carrier
•
Remove stabilizer from front axle carrier and tie up
•
Remove steering gear from front axle carrier and tie up
Lower front axle carrier and set down on a suitable surface.
Remove both engine mounts on front axle carrier and if necessary
remove with vacuum lines from front axle carrier.
If necessary, remove stoneguard on left and right from front axle
carrier.
Installation:
Use previous front axle carrier as a template for modifying or
replacing small parts.
RA Replacing front axle carrier
BMW AG - TIS
08.02.2013 06:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
