X Series E83 X3 2.0i (N46) OFFRD
32 41 311
Replacing suction line for power steering
(N46)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off hydraulic lines with plugs.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove intake duct
•
Remove air pump (for secondary air)
Remove fluid reservoir from mounting bracket/body.
Release hose clamp (1) and detach suction line (2) from fluid
reservoir.
Installation:
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Expose suction line up to connection on vane pump.
RA Replacing suction line for power steering (N46)
BMW AG - TIS
08.02.2013 07:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -