X Series E83 X3 2.0i (N46) OFFRD
33 31 503
Lowering/raising rear axle carrier
Special tools required:
•
33 4 420
Note:
If the rear axle carrier is detached from the body, it is necessary
after reinstallation to carry out a wheel/chassis alignment check.
Necessary preliminary tasks:
•
Remove emergency wheel pan
•
Remove exhaust system up to catalytic converter
•
Remove tunnel thermal insulation
•
Remove centre mount from body and release screw ring
•
Unclip both handbrake Bowden cables in tunnel
•
If necessary, disconnect plug connection from ride-height
sensor
Important!
Risk of damage!
Brake hose must not be exposed to tensile loads.
Release screw and remove bracket with brake hose.
Tightening torque 34 32 3AZ
.
RA Lowering/raising rear axle carrier
BMW AG - TIS
08.02.2013 08:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
