X Series E83 X3 2.0i (N46) OFFRD
34 41 120
Removing and installing / replacing both
handbrake Bowden cables
Special tools required:
•
32 1 030
Necessary preliminary tasks:
•
Remove storage compartment
•
Remove rear brake discs
•
Remove exhaust system.
•
Remove heat shield
Lock adjuster unit (ASZE).
Using special tool 32 1 030 , press stop (1) of adjusting spring
back to such an extent that retaining hook (2) engages in
stop (1).
Installation:
Unlock adjuster unit (ASZE).
Lever out restraining hook (2) with a suitable screwdriver.
Restraining hook (2) must detach from stop (1) of adjusting
spring.
Unclip mounting clip (1) upwards out of balance arm (2).
RA Removing and installing / replacing both handbrake Bowden cables
BMW AG - TIS
08.02.2013 09:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
