X Series E83 X3 2.0i (N46) OFFRD
Note:
For removal, the outside handle (1) must remain secured with a
screwdriver (4).
A) Pull off outside handle (1) from rear lock actuator (2).
B) Pull off outside handle (1) downwards/outwards (in direction
of arrow) from front lock actuator (3).
Installation:
Following parts on outside handle (4) must not be damaged or
missing:
1
Rear mounting
2
Front mounting
3
Felt strip (if available for refitting/replacement no longer
required)
Insert outside handle with bore hole correctly in mounting (1).
Snap rear mounting on outside handle correctly into lock
actuator (2).
Release screw (1).
Remove seals (2 and 3) in direction of arrow.
If necessary, replace faulty seals (2 and 3).
RA Removing and installing / replacing outside handle on left or right back door
BMW AG - TIS
08.02.2013 11:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
