X Series E83 X3 2.0i (N46) OFFRD
64 53 642
Replacing line from compressor to condenser
(N46)
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Follow instructions for opening and replacing parts in
refrigerant circuit.
If A/C system is opened for more than 24 hours:
Replace desiccant insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove intake filter housing
•
Remove intake snorkel, middle
•
Detach fluid reservoir for power steering and place to one
side.
Release screw (1) and remove refrigerant line.
Tightening torque 64 52 1AZ
.
Installation:
Replace sealing rings and moisten with refrigerant oil.
RA Replacing line from compressor to condenser (N46)
BMW AG - TIS
08.02.2013 18:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
