X Series E83 X3 2.0i (N46) OFFRD
65 50 055
Removing and installing/replacing central
information display
Necessary preliminary tasks:
•
Remove operator unit for heater/air conditioner
Fold monitor (1) open.
Loosen screws (2).
Unlock plug connection for central information display (3) and
disconnect.
Raise central information display (4) on passenger side.
Feed out associated wiring harness and remove central
information display (4).
Installation:
Make sure wiring harness of central information display (4) is
correctly routed.
RA Removing and installing/replacing central information display
BMW AG - TIS
08.02.2013 19:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
