X Series E83 X3 2.5i (M54) OFFRD
11 00 050
Removing and installing engine (M54)
Special tools required:
•
11 0 020
•
11 0 250
•
13 5 280
Necessary preliminary tasks:
•
Disconnect battery negative lead. (Follow instructions for
disconnecting and connecting battery).
•
Lift engine hood into assembly position.
•
Remove design cover.
•
Remove air cleaner housing.
•
Remove clean air duct.
•
Remove heater bulkhead.
•
Remove left assembly partition wall.
•
Release engine wiring harness from electronics box.
•
Drain coolant.
•
Remove radiator.
•
Remove A/C compressor drive belt.
•
Remove alternator drive belt.
•
Disconnect fuel line (feed).
•
Remove front/middle underbody protection.
•
Remove reinforcement plate.
•
Remove exhaust system.
•
Remove transmission.
•
Remove oxygen sensors (monitor).
RA Removing and installing engine (M54)
BMW AG - TIS
09.02.2013 15:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -