X Series E83 X3 2.5i (M54) OFFRD
Drive out dowel pins from timing case cover towards rear.
(Mandrel diameter less than 5 mm)
Unscrew timing case cover to cylinder head bolts.
Unfasten screws and remove timing case cover.
Important!
Check cylinder head gasket for damage; if necessary, remove
cylinder head and replace cylinder head gasket.
RA Removing and installing lower timing case cover (M52 / S52 / M52TU / M54)
BMW AG - TIS
09.02.2013 15:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -