X Series E83 X3 2.5i (M54) OFFRD
12 63 520
Replacing DME master relay (M54)
Necessary preliminary tasks:
•
Switch off ignition
•
Connect DIS Tester
Release screws (1).
Installation:
Tightening torque 12 90 4AZ
.
Remove cover (1).
Arrangement:
1.
DME master relay
Notes on troubleshooting:
If the starter motor cranks the engine during the starting sequence
but the engine fails to fire, then:
1.
Check engine fuses
2.
If fuses are blown, replace them completely with fuse holder
3.
Find out why fuses have blown
Continue troubleshooting as per DIS instructions.
RA Replacing DME master relay (M54)
BMW AG - TIS
09.02.2013 16:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
