bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

51 Engine Wiring Loom > < 2 RA Removing And Installing_replacing Battery Positive Lead Between Starter Motor An
Page 2
background image

Remove cover for fuel injectors.

Unclip battery positive lead (1) from holder (2).

Unscrew nut (1).

Tightening torque  12 41 4AZ

.

Detach battery positive lead (2) from starter motor and remove.

Note:

Check stored fault messages.

Now clear the fault memory.

RA  Removing and installing/replacing battery positive lead between starter motor an

BMW AG - TIS

09.02.2013  16:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

51 Engine Wiring Loom > < 2 RA Removing And Installing_replacing Battery Positive Lead Between Starter Motor An