X Series E83 X3 2.5i (M54) OFFRD
Replace gasket (1) between transmission housing and end
cover.
Insert new sealing ring (2) in groove of output shaft.
E46 4WD:
Replace gasket (1) between transmission housing and end
cover.
Attach slip sleeve (2) and install end cover.
Note:
Slip sleeve (2) is an integral part of the repair kit.
Clamp extension (1) in vice with protective vice jaws.
Lever out radial shaft seal (2) using a screwdriver (3) and a
block of wood (4) as a rest.
Drive in radial shaft seal with special tools 23 1 380 and
00 5 500 until flush.
RA Replacing radial shaft seal for transmission extension (A5S 360R / 390R, 4WD)
BMW AG - TIS
09.02.2013 18:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -