X Series E83 X3 2.5i (M54) OFFRD
Important!
Risk of damage!
Support rear axle carrier in area of dashed line with workshop
jack.
Release screw (1), press tunnel thermal insulation downwards a
little and release screw (2).
Release screws (4).
Tightening torque 33 32 17AZ
.
Release bolts (3) and remove compression strut (5).
Secure rear axle carrier by inserting bolts (3).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Make sure handbrake Bowden cables are correctly positioned.
Tightening torque 33 33 3AZ
.
Replacement:
Convert both holders for handbrake Bowden cables.
RA Removing and installing/replacing compression strut for rear axle carrier
BMW AG - TIS
09.02.2013 21:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
