X Series E83 X3 2.5i (M54) OFFRD
41 14 015
Replacing engine carrier with wheel arch, left
Read contents of Body, General.
Refer to the description texts of the KSD CD (FRU 41 14 015)
for details of stripping-down and rigging work.
Use only approved spot-welding apparatus for repairs.
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Wheel arch, front left
-
(2) Reinforcement, bulkhead
-
(3) Partition wall, assembly compartment
-
(4) Support carrier, bulkhead
-
(5) Support, engine carrier, rear
-
(6) Reinforcement, partition wall, right (not shown)
Open weld joints in area (1).
Note:
Cut outer metal sheet only.
Open weld joints in area (1).
RA Replacing engine carrier with wheel arch, left
BMW AG - TIS
09.02.2013 23:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -