X Series E83 X3 2.5i (M54) OFFRD
51 13 412
Removing and installing (replacing) lower
trim on rear lid
Special tools required:
•
00 9 317
Important!
Build date from 09/2006 (painted lower trim):
Due to the risk of damage to the lower trim, the clips must be
cut through from the inside.
During replacement, the lower trim can be removed from the
outside (see Fig. R51 4045).
Build date from 09/2006 (painted lower trim):
Remove panel for rear lid.
Cut through all clips (1) from the inside.
Unclip and remove lower trim from the outside.
Build date up to 09/2006 or M aerodynamic kit:
Open rear lid.
Unclip clips (1) for trim (2) with special tool 00 9 317 .
RA Removing and installing (replacing) lower trim on rear lid
BMW AG - TIS
10.02.2013 00:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
