X Series E83 X3 2.5i (M54) OFFRD
61 71 015
Removing and installing/replacing a jet nozzle
in windshield washer system
Note:
The jet nozzles of the windshield washer system are preset at the
factory and cannot be readjusted.
Lever out sealing plug (1) in direction of arrow.
Unclip, unlock and disconnect plug connection (2) behind.
Installation:
Make sure plug connection (2) is correctly seated in
mounting (3).
Ensure correct installation position (mounting (3) at top) and
correct seating of sealing plug (1).
Detach connector (1) in direction of arrow from nozzle of
windshield washer system (2).
Unlock spray nozzle (2), press out through opening and remove.
Installation:
Make sure nozzle of windshield washer system (2) is correctly
seated.
Ensure hose is laid without kinks.
RA Removing and installing/replacing a jet nozzle in windshield washer system
BMW AG - TIS
10.02.2013 05:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
