X Series E83 X3 2.5i (M54) OFFRD
65 24 020
Removing and installing or replacing blocking
circuit
Necessary preliminary tasks:
•
Remove panel for rear lid.
Unlock plug connections (1) and disconnect.
Unscrew bolt (2).
Remove blocking circuit (3) in direction of arrow.
Installation:
Fit blocking circuit (1) so that screw (2) engages thread (3) and
locating pin (4) engages bore (5).
RA Removing and installing or replacing blocking circuit
BMW AG - TIS
10.02.2013 07:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
