X Series E83 X3 2.5Si (N52K) OFFRD
Mount special tools 11 4 461 with screw (1) to inside of cylinder
head.
Mount special tool 11 4 461 with screw facing outwards on
cylinder no. 2.
Position special tools 11 4 461 so that screw connections (2)
of bearing bank are easily accessible.
Tighten upper and lower bearing banks with special tool
00 9 120 .
Tightening torque 11 31 1AZ
.
Important!
Remove special tool 11 4 461 only when exhaust camshaft
screw connection is completed.
Assemble engine.
RA Removing and installing/replacing exhaust camshaft (N52K)
BMW AG - TIS
11.02.2013 08:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
