bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

90 Carbon Canister Ventilation > < 1 RA Removing And Installing_replacing Intake Filter Housing (N52K)|Page 507
Page 1
background image

13 72 001

Replacing air cleaner element (N52K)

Necessary preliminary tasks:

Read out fault memory of DME control unit

Switch off ignition

Unlock plug (1) and remove.

Unfasten clip.

Open clips (2).

Remove top section (3) of intake filter housing.

Remove air cleaner element (1).

Installation:

Clean upper and lower sections of intake filter housing from
inside.

Install new air cleaner element.

Note:

Check stored fault messages.

Now clear the fault memory.

RA  Replacing air cleaner element (N52K)

BMW AG - TIS

11.02.2013  09:52

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

90 Carbon Canister Ventilation > < 1 RA Removing And Installing_replacing Intake Filter Housing (N52K)|Page 507