X Series E83 X3 2.5Si (N52K) OFFRD
Replace closed cover in left bumper trim with grille panel.
Remove coolant hose between coolant pump, coolant radiator and
oil-water heat exchanger.
Install coolant hose between coolant pump and coolant radiator.
Push hose onto coolant pump up to mechanical stop.
Add final details to vehicle
Fill coolant and engine oil systems
Data oil fill quantity
The oil fill quantity is increased after installation of the
supplementary cooler by 0.5 l.
Adapt DME data status
Note:
Now clear the fault memory.
RA Retrofitting supplementary oil cooler (high-speed scope option SA840) (N52K)
BMW AG - TIS
11.02.2013 10:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
