X Series E83 X3 2.5Si (N52K) OFFRD
Release screw (1).
Remove A/C condenser towards rear top from fixtures.
Tilt condenser towards engine, taking care not to damage
condenser.
Note:
Lines of A/C system remain connected to condenser.
Press lines (1) in direction of cooling loop, pull black locking ring
towards rear. Keep locking ring pressed and detach lines (1) from
cooling loop.
Important!
Catch and dispose of emerging fluid.
Press lock (2). Pull cooling loop (3) of power steering towards
rear out of module carrier.
Add final details to vehicle.
Check cooling system and power steering for leaks.
RA Removing and installing/replacing cooling loop for power steering
BMW AG - TIS
11.02.2013 10:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
