X Series E83 X3 2.5Si (N52K) OFFRD
00 57 072
Retrofitting supplementary oil cooler (high-
speed scope option SA840) (N52K)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Remove underbody protection
•
Replace front left wheel arch trim and replace dust lip
•
Replace front left trim grille
•
If necessary, replace left crashbox
•
Remove air filter housing
•
Release servo reservoir
•
Remove alternator
•
Remove heater bulkhead
•
Drain coolant
•
Remove oil pressure switch, remove oil filter housing
Mount full-flow oil filter and connection housing for oil lines.
Installation:
Tightening torque 11 42 3AZ
.
Mount oil filter housing on crankcase.
To facilitate mounting, remove coolant connection.
Installation:
Tightening torque 11 42 2AZ
.
RA Retrofitting supplementary oil cooler (high-speed scope option SA840) (N52K)
BMW AG - TIS
11.02.2013 10:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -